Home Products TorqueExtender TorqueExtender

TorqueExtender

Product Code: TE-12

The TorqueExtender™ is a socket wrench extension pole. It allows you to torque down multiple sized fasteners to ceilings safely and easily from the ground. Installs 3/8″ wedge anchors, concrete screws and drop-in anchors with ease.

Use what the inspectors use!

Standard 1/2” male square socket drive with detent ball
Standard 1/2” female square socket drive
9/16″ open ended socket
Utilizes Lagmaster® Plus Plug-in Technology
Aircraft grade black anodized aluminum
Max torque rating is 20 ft./lbs
Weighs 4.85 lbs.

Product Code	Collapsed Length	Max Extended Length	Recommended Extended Length	Shipping Weight
TE-8	4′	88 7/8″	76 ¼”	5lbs
TE-12	6′ 3″	11′ 5.25″	10′ 4.75″	5lbs

Where to buy?

Submittal Request

videos

features

LMP 9/16 Plug

Open ended, installs 9/16” hex drive wedge anchors & concrete screws

LMP Base

Open ended, accepts all LMP plugs, installs screws with ½” hex drive (Elco/Hangermate)

LMP 1/2″ Square

1/2″ male square socket driver with detent ball, our most versatile plug yet!

LM 1/2” Female Square

Use with any 1/2” square drive torque wrench or impact wrench

LMP 9/16 Plug

Open ended, installs 9/16” hex drive wedge anchors & concrete screws

LMP Base

Open ended, accepts all LMP plugs, installs screws with ½” hex drive (Elco/Hangermate)

LMP 1/2″ Square

1/2″ male square socket driver with detent ball, our most versatile plug yet!

LM 1/2” Female Square

Use with any 1/2” square drive torque wrench or impact wrench

Parts Sold Separately

Item #:	Image:	Description:
LMP 5/8 Plug
LMP 5/8 Vertigo Plug

Instructions

Seismic Bracing Installation Instructions

Required tools and fasteners: ODM, ODM375, ODM916, TE-12, Torque Wrench, 3/8” Wedge Anchor, HOCL-45 Angle Clip, ceiling wire.

Step 1. Drill a 3/8” hole into the concrete ceiling using an ODM (Overhead Drill Machine) fitted with an ODM375 3/8”x 3.325” HALT bit.

Step 2. Remove the ODM375 HALT bit and insert an ODM916 SDS Plus 9/16 ” socket adapter, set the hammer drill to hammer only.

Step 3. Insert a 3/8” wedge anchor with a HOCL-45 angle clip prettied to ceiling wire into the ODM916 socket adapter.

Step 4. Raise the ODM up to the hole and insert the wedge anchor using the hammer function of the hammer drill.

Step 5. Use a TE-12 extension pole equipped with a LMP 9/16 Hex Plug to tighten the 9/16” nut on the wedge anchor to the appropriate torque using a torque wrench (Usually 25 ft/lbs).

FAQs

General

What is a Torque Extender?

A torque extender is a long-reach socket extension pole that lets you tighten ceiling fasteners from the ground. It removes the need for ladders and helps installers torque wedge anchors, concrete screws, and drop-in anchors safely overhead.

How does a torque extender work?

You attach a compatible plug or socket to the end of the pole. The internal drive mechanism transfers torque from your wrench through the extension so you can tighten anchors at height without climbing.

What types of fasteners can it torque?

It handles common overhead fasteners such as 3/8" wedge anchors, threaded concrete screws, and other drop-in or expansion anchors. The plug you choose determines which fasteners you can install.

Who typically uses a torque extender?

Electrical, mechanical, and fire-protection crews use torque extenders for overhead anchor work, seismic bracing, and cable support installations.

Compatibility and Components

Which tools can you connect to a torque extender?

Most torque extenders accept standard 1/2" male and female square drives, allowing you to use a wide range of torque wrenches and impact wrenches.

What plug types are available for the torque extender?

There are dedicated plug options, including:

9/16" drive plugs for wedge anchors and concrete screws

Base plugs that accept all LMP inserts

1/2" male and female square plugs for general overhead torque work

How do the plug attachments connect?

The system uses a plug-in interface that locks securely into the extension pole. Once inserted, the plug stays in place while still allowing the torque wrench to apply force.

Can the torque extender work with impact wrenches?

Yes. Many installers pair it with 1/2" drive impact tools for heavier anchor installations, provided the plug is impact-rated.

Usage and Performance

What advantage does a torque extender provide for overhead work?

It lets you torque anchors from floor level, reducing setup time, improving safety, and preventing fatigue from constant ladder use.

How far can a torque extender reach?

Models vary. Some are designed for standard room heights, while extended versions reach tall commercial ceilings. Always refer to the product’s collapsed and extended lengths to match the required working height.

Does using a torque extender affect torque accuracy?

The pole maintains consistent torque transfer when used correctly. Installers rely on it to achieve the proper torque values required for overhead fasteners.

Is the pole strong enough for heavy torque?

Yes. The construction uses anodized aluminum tubing engineered to handle the torque loads listed in the specifications.

Does the pole reduce strain on the installer?

Yes. The design distributes torque along the extension so you can work with both feet on the ground, reducing physical strain and increasing stability.

Installation and Setup

How do you prepare the torque extender for use?

Attach the plug, connect your torque wrench, adjust the pole length, position the plug over the fastener, and apply torque from the ground.

Can you adjust the height while working?

The telescoping design lets you set the length in small increments, so you can match the pole to the ceiling height without losing control or stability.

Do you need special training to use it?

No formal training is required. Follow standard torque-wrench procedures and verify torque values as specified for the anchor system.

Purchase and Availability

Where is Doc’s Industries based?

Doc’s Industries is based in Simi Valley, CA. Our team is dedicated to providing quality products and above and beyond service to customers globally.

Is the torque extender available for purchase now?

Stock is maintained regularly. For current availability or lead times, contact the Doc’s Industries sales team or an authorised distributor.

Do you supply to wholesale and retail customers?

Doc’s Industries services wholesale accounts. Please use the “where to buy” function on our website to be connected to the nearest distributor.

Proposition 65 Warning for California Residents